Heated motorcycle glove Gerbing leather 12V G12

HEATED MOTORCYCLE GLOVES 12V GERBING G-12

The G12 motorcycle gloves are elegant and have a perfect fit
They are very comfortable and have a good freedom of movement thanks to the very soft and supple leather.
Direct connected to your motorcycle battery or optionally be worn with a separate battery.

Continuous heat while riding :

• Direct connection to the vehicle battery using the battery cable CXPP.
• With the included Junior controller JC-12V you can control the heat in 4 levels.
  Within a few seconds you will feel the warmth of the electrically heated gloves.

Glove features :

• The heated gloves are made of supple, soft full aniline leather.
• Stainless steel, sustainable heating Microwire® , not noticeable in the glove.
• Heating over the entire length of the fingers and the upper side hands.
• High level of comfort thanks to vibration reducing properties.
• Hipora® Lining , breathable and protection against water and wind.
• Thinsulate® Insulation for extra warmth and comfort.
• Soft tricot fleece lining.
• Adjustable wrist strap with Velcro closure.
• Including supplied with Gerbing gloves G12 : Battery connection cable + Junior Controller.

Specifications :

• Microwire®technology , very good and uniform heat conduction.
• 12 Volt power source (motorcycle, scooter, quad, car, plane).
• Power consumption : 27 Watts / 2.2 Amp
• Surface T ° : 5°C at  -2°C to 2°C
• Available Sizes : XXS - XXXL

• 12Volt heated gloves Gerbing are designed to produce sufficient heat at temperatures of  -20°C and with a speed of 120 Km / h.
• As the outside temperature rises ,12V gloves will be warmer.
• From +5°C , you can risk red spots or blisters caused by too hot gloves.
• Check your skin regularly and do not let the temperature rise to high.
• Use your temperature controller in time !

OPTIONAL : for use without connecting to the vehicle

• With a separate, rechargeable 12V battery  in connection with your gloves through a long Y-cable CXY.
• Batteries : you can choose the B12V-5200 KIT or powerful B12V-8000 KIT (KIT = battery + remote + charger).
  
  Note : the junior controller can not be used in conjunction with a separate, rechargeable 12V battery.
  
  

  Battery capacity / heat duration in connection with gloves
  B12V - 5200	B12V - 8000
  Level 3 : +- 2.5 hours	Level 3 : +- 5 hours
  Level 2 : +- 4 hours	Level 2 : +- 8 hours
  Level 1 : +- 7 hours	Level 1 : +- 14 hours

  
      The duration of the rechargeable battery may vary depending on the outside.
      Capacity decreases as it gets colder.
      Below 0 ° C the battery will have a capacity of about 80% 

Maintenance batteries : READ MORE

Warranty Gerbing : READ MORE